New Trad Broadhead

[petew]

Here is a glimps of a new head about to hit the market in the very near future.
300 grains, solid 1 piece 3 to 1 ratio , cast stainless steel .095 diameter.
http://peteward.com/internet%20pictures/ss3new.JPG.
Have a peek and let us know what you think.

[Black_Widow]

looks pretty decent to me.. 1 piece construction is always good

[sunaj]

Oh, that is just pure P_____
where can i get some????

[hardluck59]

Looks like a screw in Wensel Woodsman with no holes in it.

[petew]

Hi Cal, That photo is the 300 extreem. Not realy like the woodsman, and it looks like it is not going to be offered any more.

There is a new one out called the VPA terminator. http://www.vparchery.com/terminator.php carbon steel, teflon coated, screw in or glue on.


http://www.vparchery.com/Resources/Terminator_broadheads.jpg

I have some of the 200 and 250 grain models and some 300 grain are on the way.
These are CNC nachined from solid 1pc stock and are screw in or glue on. The screw in is 1 solid piece, no adapter ! They were hard to get this fall, as it was a new head but they should be in good supply come spring. Dennis at Git-r-donearchery.com is the Canadian source for them.

Available in these sizes.
Glue-On Screw-On
160 grains 175 grains
190 grains 200 grains
250 grains
Coming 2010:
250 grains 100 grains
125 grains
150 grains
300 grains
For those of us that like a heavy point the 250 glue on with a 125 steel adapter will be serious weight forward and add a 100 gr brass insert, thats 575 grains of new territory to explore.
I will bring some over to the Dart in the new year for you to look at.

The glue on in the photo show a steel adapter beside it. The screw in does not use adapters. It is a solid 1 piece head.

Pete