Dracon_84
01-31-2012, 12:34 AM
Hey all, im looking at the Easton Flatline Surgical line of shafts and i would like some input, id like to use a 125 to 150 grin broad head, either the 2 bladed, trusted and true friend, or the 3 bladed heads like the Woodsman Elite broadheads.
i have to use a steel broadhead adapter, id like the 125 and the insert has to be used im kinda sad at this LOL, more weight i can i believe use the easton HIT brass insert if i can it would be 75 grains so the steel adapter wouldnt need to be the weight
and the total weight is 125 + 125+ 75 grains = 325 grains
and the shaft is i believe for the 340 spline to be 8.2 GPI and i like the 32 inch shafts = 262.4
and im wondering if anyone has any advice for me?? im one who likes the glue on heads, not the screw on ones, i used thread locker and i lost a lot of expensive heads in the past :sos:
i have to use a steel broadhead adapter, id like the 125 and the insert has to be used im kinda sad at this LOL, more weight i can i believe use the easton HIT brass insert if i can it would be 75 grains so the steel adapter wouldnt need to be the weight
and the total weight is 125 + 125+ 75 grains = 325 grains
and the shaft is i believe for the 340 spline to be 8.2 GPI and i like the 32 inch shafts = 262.4
and im wondering if anyone has any advice for me?? im one who likes the glue on heads, not the screw on ones, i used thread locker and i lost a lot of expensive heads in the past :sos: