Arrow head adapters

[Dracon_84]

Hey guys im looking for adapters for my dozen XX75 Gamegetter 500 spline, or 2016 number arrow shafts, i saw a set of 100 grain steel broad head screw-in adapters im wondering if they will fit, im getting the arrows set up, the total weight would be 225 grains, the bow im trying to get is a 68" Ragim Wolf long bow, its weight id 60 #, my draw length is 27 inches but i like the way the 32 inch arrows fly, can any one help me find adapters for glue on broad heads?? I need to know if it is an 5/16" or a 11/32" size adapter

[manyletters]

I have 100gr stainless steel adapters in stock along with the 11/32 aluminum ones....the aluminum ones are 42 grains!!

[Dracon_84]

I have 100gr stainless steel adapters in stock along with the 11/32 aluminum ones....the aluminum ones are 42 grains!!

ok, im wondering if the steel 11/32 adapters would fit the inserts for the aluminum shafts

[manyletters]

Yes they will...the thread should be 8/32!!

[Dracon_84]

Im looking at the Carbon Express Heritage 250 shafts now, the guy i purchased the easton shafts just dissipeared :( you dont happen to have any for these shafts?? i think they are 5/16

[poil27]

carbon express heritage 250 L 11.0 spine 0.373" dia 0.305"

so anay insert that fits will do the trick

[poil27]

part numer from carbon express W3002 (type 2) weight 11 grains

[Dracon_84]

carbon express heritage 250 L 11.0 spine 0.373" dia 0.305"

so anay insert that fits will do the trick

Im looking for the glue in adapters not the inserts lol, i cant stand the screw in broadheads anymore, last animal i killed the arrow twisted off in flight, the head went into one part and the shaft stuck in the fur, it was wierd lol

[poil27]

locktite is your freind i always use blue tread lock for arrow head never had anay problem